Search results for: '6358 incom when time door xauusd mode the mount'

The 380N/UK is a self contained telephone interface module for use on an analogue telephone line. Its primary function is to enable a user to communicate with an analogue telephone line and a door entry point (or points) using the same telephone handset. The handset can be a standard corded model, a cordless such as a DECT telephone or even a hands free telephone.

The 380N/UK can also be configured for use with a PABX (Private Automatic Branch Exchange) telephone system to be connected into either a spare analogue trunk input or spare telephone extension. All programming is carried out using the telephone keypad (utilising standard DTMF tones).

Desk kit for the surface mount KRA76 handset and back boxes for the KRA78 flush mount handset.

• KRA038 – Desk kit for surface mount audio Kristallo with handset (KRA76)
• KRA983 – Flush back box for audio Kristallo apartment station (dry line walls) (KRA78)
• KRA981 – Flush back box for audio Kristallo apartment station (solid walls) (KRA78)

The required mounting plate for the operation of 3600 series videophones.

4000 Series Codelock Modules

Switched mode 1.25A 12Vdc DIN mount power supply.

Used for Videx GSM kits.

4000 Proximity Reader Modules

The Magnetic lock uses an electrical current to produce a magnetic force. When a current is passed through the coil, the magnet lock becomes magnetized. The door will be securely bonded when the electromagnet is energized holding against the armature plate (Power required to lock).

VY280t   Locking doo magnet with timer

VY280t   Locking doo magnet with timer

VY280t   Locking doo magnet with timer

VY280t   Locking doo magnet with timer

VY280t   Locking doo magnet with timer

VY280t   Locking doo magnet with timer

VY280t   Locking doo magnet with timer

8000 Series one way and two way videokit, 1 to 12 buttons, with or without codelock, stainless

4000 Series one way and two way 2-Wire videokit, 1 to 12 buttons, with or without codelock, stainless or brushed steel

The keypad can be programmed with 3 codes (1 code per relay), with 3 relay outputs which have a switched 0V PTE input for relays 1 and 2 only. The relays are programmable between 1-99 seconds or 00 for latching mode. Low current keypad which requires a 12-24v ac/dc psu and have blue backlit buttons with adjustable brightness control.

8840 – this module can be used for mounting non-Videx equipment in to modular door panels, as a filler for future expansion of the entrance panels features or to complete a panel where the required number of modules is not equal to the housing capacity.

8846 – Backlit with a white LED and is used for displaying information such block name or special instructions. Complete with card insert which can easily be changed from the inside.