Search results for: 'tg:joanneforex the completed free tradit code updated 20px udemy'

The keypad can be programmed with 3 codes (1 code per relay), with 3 relay outputs which have a switched 0V PTE input for relays 1 and 2 only. The relays are programmable between 1-99 seconds or 00 for latching mode. Low current keypad which requires a 12-24v ac/dc psu and have blue backlit buttons with adjustable brightness control.

4000 Series Codelock Modules

4810 GSM Speaker Module

VR120 Series 4+1 and VX2200 Audio panels, 1 to 12 buttons, with codelock, prox reader or no access control.

The 380N/UK is a self contained telephone interface module for use on an analogue telephone line. Its primary function is to enable a user to communicate with an analogue telephone line and a door entry point (or points) using the same telephone handset. The handset can be a standard corded model, a cordless such as a DECT telephone or even a hands free telephone.

The 380N/UK can also be configured for use with a PABX (Private Automatic Branch Exchange) telephone system to be connected into either a spare analogue trunk input or spare telephone extension. All programming is carried out using the telephone keypad (utilising standard DTMF tones).

VY280t   Locking doo magnet with timer

VY280t   Locking doo magnet with timer

VY280t   Locking doo magnet with timer

VY280t   Locking doo magnet with timer

VY280t   Locking doo magnet with timer

VY280t   Locking doo magnet with timer

VY280t   Locking doo magnet with timer

4000 Series one way and two way 2-Wire videokit, 1 to 12 buttons, with or without codelock, stainless or brushed steel

8840 – this module can be used for mounting non-Videx equipment in to modular door panels, as a filler for future expansion of the entrance panels features or to complete a panel where the required number of modules is not equal to the housing capacity.

8846 – Backlit with a white LED and is used for displaying information such block name or special instructions. Complete with card insert which can easily be changed from the inside. 

8000 Series one way and two way videokit, 1 to 12 buttons, with or without codelock, stainless

Coded access and Vprox proximity modules are available for the 8000 Series range:

8800 – 2 code, 2 relay output coded access module with push to exit inputs.  Both relays are programmable between 1-99 seconds or latching.  Codes can be 4-8 digits long.

8900- 100 code, 2 relay output coded access module with push to exit inputs.  Both relays are programmable between 1-99 seconds or latching.  Codes can be 4-8 digits long.

8849 – Proximity reader module suitable for all Vprox systems. It has a yellow standby led, green “fob/card accepted” led and red “not valid led. This reader must be fitted within 50 metres of controller and requires 5 connections.

1 & 2 button 8000 Series colour camera and speaker unit for the VK8K kits. 

The module has an inbuilt colour CCD camera complete with auto iris lens and infra-red LED’s for illumination, an anti-mist device plus a screw to adjust the visual angle 10 degrees in any direction.  The unit does not require a coxial cable and instead used a balanced video signal requiring a twisted pair.

VR4KVPM – Vprox reader module suitable for all Vprox systems. It has a yellow standby led, green “fob/card accepted” led and red “not valid led. This reader must be fitted within 200 metres of controller.

VR4KEX5M – Coded access module including an EX5 reader with 99 codes and 2 relay outputs with push to exit buttons inputs for each.

VR4KPPM – Wiegand proximity reader module for Portal Plus systems. Includes 3 LED’s and sounder for user feedback. Can be used on the Portal Plus access control system or other third party systems which support the Wiegand protocol.

VR4KPROXM – Blank proximity reader module (to fit 40mm x 40mm panel mount reader).

VR4KDM – LCD display and voice annunciation module

VR4KMI – VR4K series MiAccess proximity reader with smart Mifare PC programming and USB port

VRMI – Add a MiAccess proximity reader with smart Mifare PC programming and USB port to a Vandal Resistant series panel

The Magnetic lock uses an electrical current to produce a magnetic force. When a current is passed through the coil, the magnet lock becomes magnetized. The door will be securely bonded when the electromagnet is energized holding against the armature plate (Power required to lock).

MTPXS-MF-SA – Surface MiAccess proximity reader with smart Mifare PC programming and USB port (silver)