Search results for: '6388 incom with for exchang has mount volume'

4000 Series one way and two way 2-Wire videokit, 1 to 12 buttons, with or without codelock, stainless or brushed steel

The 380N/UK is a self contained telephone interface module for use on an analogue telephone line. Its primary function is to enable a user to communicate with an analogue telephone line and a door entry point (or points) using the same telephone handset. The handset can be a standard corded model, a cordless such as a DECT telephone or even a hands free telephone.

The 380N/UK can also be configured for use with a PABX (Private Automatic Branch Exchange) telephone system to be connected into either a spare analogue trunk input or spare telephone extension. All programming is carried out using the telephone keypad (utilising standard DTMF tones).

Desk kit for the surface mount KRA76 handset and back boxes for the KRA78 flush mount handset.

• KRA038 – Desk kit for surface mount audio Kristallo with handset (KRA76)
• KRA983 – Flush back box for audio Kristallo apartment station (dry line walls) (KRA78)
• KRA981 – Flush back box for audio Kristallo apartment station (solid walls) (KRA78)

The required mounting plate for the operation of 3600 series videophones.

A range of accessory modules for the 4000 series:

4846 – Back-lit information module suitable to display information such as a house name or operating instructions.

4846/UK – Information module modified for use with panel mount proximity readers from other manufacturers. Front is clear plastic and has facility for customers own graphics.

4846/IND – Induction loop module, comprising of an IL-EL42-2 induction coil. Complies with DDA requirements and the Equality Act 2010, the induction loop module can connect to the 4000 series audio amplifier modules and enables users who are hard of hearing to hear the conversation from the intercom panel.

4840 – Blanking module –  for the 4000 series modular door panels.  Can be used as a space filler, to mount third part equipment to a panel or to allow future expansion of features to a panel.

VR4KVPM – Vprox reader module suitable for all Vprox systems. It has a yellow standby led, green “fob/card accepted” led and red “not valid led. This reader must be fitted within 200 metres of controller.

VR4KEX5M – Coded access module including an EX5 reader with 99 codes and 2 relay outputs with push to exit buttons inputs for each.

VR4KPPM – Wiegand proximity reader module for Portal Plus systems. Includes 3 LED’s and sounder for user feedback. Can be used on the Portal Plus access control system or other third party systems which support the Wiegand protocol.

VR4KPROXM – Blank proximity reader module (to fit 40mm x 40mm panel mount reader).

VR4KDM – LCD display and voice annunciation module

VR4KMI – VR4K series MiAccess proximity reader with smart Mifare PC programming and USB port

VRMI – Add a MiAccess proximity reader with smart Mifare PC programming and USB port to a Vandal Resistant series panel

1 & 2 button 8000 Series colour camera and speaker unit for the VK8K kits. 

The module has an inbuilt colour CCD camera complete with auto iris lens and infra-red LED’s for illumination, an anti-mist device plus a screw to adjust the visual angle 10 degrees in any direction.  The unit does not require a coxial cable and instead used a balanced video signal requiring a twisted pair.

VY280t   Locking doo magnet with timer

VY280t   Locking doo magnet with timer

VY280t   Locking doo magnet with timer

VY280t   Locking doo magnet with timer

VY280t   Locking doo magnet with timer

VY280t   Locking doo magnet with timer

VY280t   Locking doo magnet with timer

IPure IP videokit, one way and two way, 1 to 12 buttons, with or without codelock, stainless or brushed steel

Coded access and Vprox proximity modules are available for the 8000 Series range:

8800 – 2 code, 2 relay output coded access module with push to exit inputs.  Both relays are programmable between 1-99 seconds or latching.  Codes can be 4-8 digits long.

8900- 100 code, 2 relay output coded access module with push to exit inputs.  Both relays are programmable between 1-99 seconds or latching.  Codes can be 4-8 digits long.

8849 – Proximity reader module suitable for all Vprox systems. It has a yellow standby led, green “fob/card accepted” led and red “not valid led. This reader must be fitted within 50 metres of controller and requires 5 connections.

Vandal Resistant 4000 Series one way and two way 4G GSM audiokit, 1 to 12 buttons, with or without codelock, stainless or brushed steel

8000 Series one way and two way videokit, 1 to 12 buttons, with or without codelock, stainless