Search results for: 'tg:joanneforex 50 plus a dry flex tradit strategy youtube'

4810 GSM Speaker Module

4000 Proximity Reader Modules

1 & 2 button 8000 Series colour camera and speaker unit for the VK8K kits. 

The module has an inbuilt colour CCD camera complete with auto iris lens and infra-red LED’s for illumination, an anti-mist device plus a screw to adjust the visual angle 10 degrees in any direction.  The unit does not require a coxial cable and instead used a balanced video signal requiring a twisted pair.

VR4KVPM – Vprox reader module suitable for all Vprox systems. It has a yellow standby led, green “fob/card accepted” led and red “not valid led. This reader must be fitted within 200 metres of controller.

VR4KEX5M – Coded access module including an EX5 reader with 99 codes and 2 relay outputs with push to exit buttons inputs for each.

VR4KPPM – Wiegand proximity reader module for Portal Plus systems. Includes 3 LED’s and sounder for user feedback. Can be used on the Portal Plus access control system or other third party systems which support the Wiegand protocol.

VR4KPROXM – Blank proximity reader module (to fit 40mm x 40mm panel mount reader).

VR4KDM – LCD display and voice annunciation module

VR4KMI – VR4K series MiAccess proximity reader with smart Mifare PC programming and USB port

VRMI – Add a MiAccess proximity reader with smart Mifare PC programming and USB port to a Vandal Resistant series panel

VR120 Series 4+1 and VX2200 Audio panels, 1 to 12 buttons, with codelock, prox reader or no access control.

Coded access and Vprox proximity modules are available for the 8000 Series range:

8800 – 2 code, 2 relay output coded access module with push to exit inputs.  Both relays are programmable between 1-99 seconds or latching.  Codes can be 4-8 digits long.

8900- 100 code, 2 relay output coded access module with push to exit inputs.  Both relays are programmable between 1-99 seconds or latching.  Codes can be 4-8 digits long.

8849 – Proximity reader module suitable for all Vprox systems. It has a yellow standby led, green “fob/card accepted” led and red “not valid led. This reader must be fitted within 50 metres of controller and requires 5 connections.

4000 Series one way and two way 4G GSM audiokit, 1 to 12 buttons, with or without codelock, stainless or brushed steel

Desk kit for the surface mount KRA76 handset and back boxes for the KRA78 flush mount handset.

• KRA038 – Desk kit for surface mount audio Kristallo with handset (KRA76)
• KRA983 – Flush back box for audio Kristallo apartment station (dry line walls) (KRA78)
• KRA981 – Flush back box for audio Kristallo apartment station (solid walls) (KRA78)

4000 Series Codelock Modules

8000 Series one way and two way videokit, 1 to 12 buttons, with or without codelock, stainless

4000 Series one way and two way 2-Wire videokit, 1 to 12 buttons, with or without codelock, stainless or brushed steel

The Magnetic lock uses an electrical current to produce a magnetic force. When a current is passed through the coil, the magnet lock becomes magnetized. The door will be securely bonded when the electromagnet is energized holding against the armature plate (Power required to lock).

4000 Series Button Module

MTPXS-MF-SA – Surface MiAccess proximity reader with smart Mifare PC programming and USB port (silver)

4000 Series Button Module

VY280t   Locking doo magnet with timer

VY280t   Locking doo magnet with timer

VY280t   Locking doo magnet with timer

VY280t   Locking doo magnet with timer

VY280t   Locking doo magnet with timer