Search results for: 'tg:alba5300 blue indicator for 15 min card'

The keypad can be programmed with 3 codes (1 code per relay), with 3 relay outputs which have a switched 0V PTE input for relays 1 and 2 only. The relays are programmable between 1-99 seconds or 00 for latching mode. Low current keypad which requires a 12-24v ac/dc psu and have blue backlit buttons with adjustable brightness control.

Vandal resistant 4000 Series accessory modules:

VR4KIFM – Information module for 4000 VR panels. Backlit with blue led’s, it had a card insert which can be used for Company name or operating instructions etc.

VR4K blanking module for 4000 series VR panels. Used to fill in spare space in 4000 series modules to mount third party prox/swipe readers etc.

VR4KIND – Audio induction loop module for the hard of hearing.  The induction loop can connect to various audio amplifiers (136N, 138N, 140, 150 GSM, 437 and Vx2200 digital panels) to enable users with a hearing aid set to the ‘T’ position to hear the conversation from the intercom panel.

VY280t   Locking doo magnet with timer

VY280t   Locking doo magnet with timer

VY280t   Locking doo magnet with timer

VY280t   Locking doo magnet with timer

VY280t   Locking doo magnet with timer

VY280t   Locking doo magnet with timer

VY280t   Locking doo magnet with timer

4000 Proximity Reader Modules

4000 Series Button Module

MTPXS-MF-SA – Surface MiAccess proximity reader with smart Mifare PC programming and USB port (silver)

4000 Series Button Module

8840 – this module can be used for mounting non-Videx equipment in to modular door panels, as a filler for future expansion of the entrance panels features or to complete a panel where the required number of modules is not equal to the housing capacity.

8846 – Backlit with a white LED and is used for displaying information such block name or special instructions. Complete with card insert which can easily be changed from the inside. 

Coded access and Vprox proximity modules are available for the 8000 Series range:

8800 – 2 code, 2 relay output coded access module with push to exit inputs.  Both relays are programmable between 1-99 seconds or latching.  Codes can be 4-8 digits long.

8900- 100 code, 2 relay output coded access module with push to exit inputs.  Both relays are programmable between 1-99 seconds or latching.  Codes can be 4-8 digits long.

8849 – Proximity reader module suitable for all Vprox systems. It has a yellow standby led, green “fob/card accepted” led and red “not valid led. This reader must be fitted within 50 metres of controller and requires 5 connections.

VR4KVPM – Vprox reader module suitable for all Vprox systems. It has a yellow standby led, green “fob/card accepted” led and red “not valid led. This reader must be fitted within 200 metres of controller.

VR4KEX5M – Coded access module including an EX5 reader with 99 codes and 2 relay outputs with push to exit buttons inputs for each.

VR4KPPM – Wiegand proximity reader module for Portal Plus systems. Includes 3 LED’s and sounder for user feedback. Can be used on the Portal Plus access control system or other third party systems which support the Wiegand protocol.

VR4KPROXM – Blank proximity reader module (to fit 40mm x 40mm panel mount reader).

VR4KDM – LCD display and voice annunciation module

VR4KMI – VR4K series MiAccess proximity reader with smart Mifare PC programming and USB port

VRMI – Add a MiAccess proximity reader with smart Mifare PC programming and USB port to a Vandal Resistant series panel

IPure IP videokit, one way and two way, 1 to 12 buttons, with or without codelock, stainless or brushed steel

4000 Series Codelock Modules

Vandal Resistant 4000 Series one way and two way 4G GSM audiokit, 1 to 12 buttons, with or without codelock, stainless or brushed steel

4000 Series one way and two way 4G GSM audiokit, 1 to 12 buttons, with or without codelock, stainless or brushed steel