Search results for: 'code when 8000 8800 the 8800 el42 null end'

Coded access and Vprox proximity modules are available for the 8000 Series range:

8800 – 2 code, 2 relay output coded access module with push to exit inputs.  Both relays are programmable between 1-99 seconds or latching.  Codes can be 4-8 digits long.

8900- 100 code, 2 relay output coded access module with push to exit inputs.  Both relays are programmable between 1-99 seconds or latching.  Codes can be 4-8 digits long.

8849 – Proximity reader module suitable for all Vprox systems. It has a yellow standby led, green “fob/card accepted” led and red “not valid led. This reader must be fitted within 50 metres of controller and requires 5 connections.

8000 Series one way and two way videokit, 1 to 12 buttons, with or without codelock, stainless

The keypad can be programmed with 3 codes (1 code per relay), with 3 relay outputs which have a switched 0V PTE input for relays 1 and 2 only. The relays are programmable between 1-99 seconds or 00 for latching mode. Low current keypad which requires a 12-24v ac/dc psu and have blue backlit buttons with adjustable brightness control.

Choose the panel style using the selection buttons. The price will change automatically. The standard finish is matte, but you can request mirror finish on the cart notes at no extra cost.

8000 frames will fit inside the older 3000 housings. 8000 modules will fit inside older 3000 frames.

All sets include a power supply and an audio handset per button. You can add three more Art.3011 handsets to a set. See handsets page. Refer to manuals page for wiring details. 

Standard rainhood is silver. Black is a popular option at no extra cost. Call our sales team for options. 

8000 Series Button Module

1 & 2 button 8000 Series colour camera and speaker unit for the VK8K kits. 

The module has an inbuilt colour CCD camera complete with auto iris lens and infra-red LED’s for illumination, an anti-mist device plus a screw to adjust the visual angle 10 degrees in any direction.  The unit does not require a coxial cable and instead used a balanced video signal requiring a twisted pair.

8840 – this module can be used for mounting non-Videx equipment in to modular door panels, as a filler for future expansion of the entrance panels features or to complete a panel where the required number of modules is not equal to the housing capacity.

8846 – Backlit with a white LED and is used for displaying information such block name or special instructions. Complete with card insert which can easily be changed from the inside. 

Rainshields for the 8851, 8852 and 8853 flush boxes.

8000 Series speaker modules are available for a range of Videx systems, from standard analogue up to Vx2200 digital systems. The speaker modules themselves are available with either 0, 1 or 2 buttons, and a further 62 buttons may be added using 8842, 8843, 8844 and 8845 button modules.

All modules name windows are illuminated, and contain a replaceable insert for displaying flat numbers or names.

All modules contain a speaker and fly lead with microphone which is easily fitted in to a 8000 Series frame. Modules slide in to the housing frames securing them in place.

Speech levels may be adjusted using separate controls for both the speaker and microphone.

4000 Series Codelock Modules

A range of accessory modules for the 4000 series:

4846 – Back-lit information module suitable to display information such as a house name or operating instructions.

4846/UK – Information module modified for use with panel mount proximity readers from other manufacturers. Front is clear plastic and has facility for customers own graphics.

4846/IND – Induction loop module, comprising of an IL-EL42-2 induction coil. Complies with DDA requirements and the Equality Act 2010, the induction loop module can connect to the 4000 series audio amplifier modules and enables users who are hard of hearing to hear the conversation from the intercom panel.

4840 – Blanking module –  for the 4000 series modular door panels.  Can be used as a space filler, to mount third part equipment to a panel or to allow future expansion of features to a panel.

The Magnetic lock uses an electrical current to produce a magnetic force. When a current is passed through the coil, the magnet lock becomes magnetized. The door will be securely bonded when the electromagnet is energized holding against the armature plate (Power required to lock).

VY280t   Locking doo magnet with timer

VY280t   Locking doo magnet with timer

VY280t   Locking doo magnet with timer

VY280t   Locking doo magnet with timer

VY280t   Locking doo magnet with timer

VY280t   Locking doo magnet with timer

VY280t   Locking doo magnet with timer