Search results for: 'tg:alba5300 which current has the highest trading volume'

4000 Proximity Reader Modules

4000 Series Codelock Modules

VR4KVPM – Vprox reader module suitable for all Vprox systems. It has a yellow standby led, green “fob/card accepted” led and red “not valid led. This reader must be fitted within 200 metres of controller.

VR4KEX5M – Coded access module including an EX5 reader with 99 codes and 2 relay outputs with push to exit buttons inputs for each.

VR4KPPM – Wiegand proximity reader module for Portal Plus systems. Includes 3 LED’s and sounder for user feedback. Can be used on the Portal Plus access control system or other third party systems which support the Wiegand protocol.

VR4KPROXM – Blank proximity reader module (to fit 40mm x 40mm panel mount reader).

VR4KDM – LCD display and voice annunciation module

VR4KMI – VR4K series MiAccess proximity reader with smart Mifare PC programming and USB port

VRMI – Add a MiAccess proximity reader with smart Mifare PC programming and USB port to a Vandal Resistant series panel

4000 Series Button Module

4000 Series Button Module

1 & 2 button 8000 Series colour camera and speaker unit for the VK8K kits. 

The module has an inbuilt colour CCD camera complete with auto iris lens and infra-red LED’s for illumination, an anti-mist device plus a screw to adjust the visual angle 10 degrees in any direction.  The unit does not require a coxial cable and instead used a balanced video signal requiring a twisted pair.

Coded access and Vprox proximity modules are available for the 8000 Series range:

8800 – 2 code, 2 relay output coded access module with push to exit inputs.  Both relays are programmable between 1-99 seconds or latching.  Codes can be 4-8 digits long.

8900- 100 code, 2 relay output coded access module with push to exit inputs.  Both relays are programmable between 1-99 seconds or latching.  Codes can be 4-8 digits long.

8849 – Proximity reader module suitable for all Vprox systems. It has a yellow standby led, green “fob/card accepted” led and red “not valid led. This reader must be fitted within 50 metres of controller and requires 5 connections.

8840 – this module can be used for mounting non-Videx equipment in to modular door panels, as a filler for future expansion of the entrance panels features or to complete a panel where the required number of modules is not equal to the housing capacity.

8846 – Backlit with a white LED and is used for displaying information such block name or special instructions. Complete with card insert which can easily be changed from the inside. 

A range of accessory modules for the 4000 series:

4846 – Back-lit information module suitable to display information such as a house name or operating instructions.

4846/UK – Information module modified for use with panel mount proximity readers from other manufacturers. Front is clear plastic and has facility for customers own graphics.

4846/IND – Induction loop module, comprising of an IL-EL42-2 induction coil. Complies with DDA requirements and the Equality Act 2010, the induction loop module can connect to the 4000 series audio amplifier modules and enables users who are hard of hearing to hear the conversation from the intercom panel.

4840 – Blanking module –  for the 4000 series modular door panels.  Can be used as a space filler, to mount third part equipment to a panel or to allow future expansion of features to a panel.

Vandal resistant 4000 Series accessory modules:

VR4KIFM – Information module for 4000 VR panels. Backlit with blue led’s, it had a card insert which can be used for Company name or operating instructions etc.

VR4K blanking module for 4000 series VR panels. Used to fill in spare space in 4000 series modules to mount third party prox/swipe readers etc.

VR4KIND – Audio induction loop module for the hard of hearing.  The induction loop can connect to various audio amplifiers (136N, 138N, 140, 150 GSM, 437 and Vx2200 digital panels) to enable users with a hearing aid set to the ‘T’ position to hear the conversation from the intercom panel.

8000 Series speaker modules are available for a range of Videx systems, from standard analogue up to Vx2200 digital systems. The speaker modules themselves are available with either 0, 1 or 2 buttons, and a further 62 buttons may be added using 8842, 8843, 8844 and 8845 button modules.

All modules name windows are illuminated, and contain a replaceable insert for displaying flat numbers or names.

All modules contain a speaker and fly lead with microphone which is easily fitted in to a 8000 Series frame. Modules slide in to the housing frames securing them in place.

Speech levels may be adjusted using separate controls for both the speaker and microphone.