Search results for: 'tg:goldeasignal how to use metatrader 4 for automatic tradit'

13Vac 18VA max transformer in a 3 modules A type DIN box. A type DIN box (52.5mmx105mmx65mm). Includes internal PTC protection.

1 & 2 button 8000 Series colour camera and speaker unit for the VK8K kits. 

The module has an inbuilt colour CCD camera complete with auto iris lens and infra-red LED’s for illumination, an anti-mist device plus a screw to adjust the visual angle 10 degrees in any direction.  The unit does not require a coxial cable and instead used a balanced video signal requiring a twisted pair.

3000 Series Audio Handsets

MTPXS-MF-SA – Surface MiAccess proximity reader with smart Mifare PC programming and USB port (silver)

4000 Proximity Reader Modules

VR4K Series Button Module

Coded access and Vprox proximity modules are available for the 8000 Series range:

8800 – 2 code, 2 relay output coded access module with push to exit inputs.  Both relays are programmable between 1-99 seconds or latching.  Codes can be 4-8 digits long.

8900- 100 code, 2 relay output coded access module with push to exit inputs.  Both relays are programmable between 1-99 seconds or latching.  Codes can be 4-8 digits long.

8849 – Proximity reader module suitable for all Vprox systems. It has a yellow standby led, green “fob/card accepted” led and red “not valid led. This reader must be fitted within 50 metres of controller and requires 5 connections.

3011 Audio Handset

3111 Audio Handset

3021 Audio Handset

3112 Audio Handset

3102 Audio Handset

3001 Audio Handset

3101 Audio Handset

3113 Audio Handset

4000 Series one way and two way 2-Wire videokit, 1 to 12 buttons, with or without codelock, stainless or brushed steel

The Magnetic lock uses an electrical current to produce a magnetic force. When a current is passed through the coil, the magnet lock becomes magnetized. The door will be securely bonded when the electromagnet is energized holding against the armature plate (Power required to lock).

VR4K Series Speaker Module

VR4KVPM – Vprox reader module suitable for all Vprox systems. It has a yellow standby led, green “fob/card accepted” led and red “not valid led. This reader must be fitted within 200 metres of controller.

VR4KEX5M – Coded access module including an EX5 reader with 99 codes and 2 relay outputs with push to exit buttons inputs for each.

VR4KPPM – Wiegand proximity reader module for Portal Plus systems. Includes 3 LED’s and sounder for user feedback. Can be used on the Portal Plus access control system or other third party systems which support the Wiegand protocol.

VR4KPROXM – Blank proximity reader module (to fit 40mm x 40mm panel mount reader).

VR4KDM – LCD display and voice annunciation module

VR4KMI – VR4K series MiAccess proximity reader with smart Mifare PC programming and USB port

VRMI – Add a MiAccess proximity reader with smart Mifare PC programming and USB port to a Vandal Resistant series panel

4000 Series Camera/Speaker Module